Type QD

General Specifications

• 2-Way - Cast Bronze Bodies - Packless
• Direct Acting Solenoid Valves
• Normally Closed - Full Port
• For: General Service air-inert gases-water-oil-steam
• Pressure: Zero to 14 psi max (depending on port size and fluid)
• Temperature: -420°F min to 450°F max fluid
• Mounting: Install in horizontal line with coil upright and on top

Operation

• For - General service-air-inert gases-water-oil-steam

Sizing

• 1/8" - 1" NPTF Connections

Construction

• Class F or N coils are waterproof, fungus proof, molded of filled polyester with 18" leads in NEMA 1 enclosures with 1/2" conduit connector.
• Bodies are globe style, sand cast in bronze, and rated to 400 psi WOG.
• Bonnet assemblies are 304 SS tubes silver soldered to brass bonnet and tube plug.
• Lift Assemblies are a 416 SS Armature connected to the 303 SS Valve Head with a 303 SS Post, and held by 316 SS Pins. Valve Head O-rings are Buna.

Specials

• EP, VitonÆ, and Teflon™ Head Seats Teflon™
• coated internal parts & other special assemblies
• Non-standard coils with voltage, wattage, and lead wire length to your specifications.
• Coil enclosures meeting NEMA 4, 5, & 7