Food and beverage processing demands hygienic, high-performance solenoid valves to maintain sanitation, fluid control precision, and operational efficiency. At Gould Solenoid Valves, we manufacture 316 stainless steel two-way solenoid valves designed for steam, CO₂, water, and ingredient transfer applications in breweries, distilleries, dairies, food production, and beverage bottling.
As part of critical processing systems, our solenoid valves minimize downtime, ensure safety compliance, and provide long-lasting reliability. With options like the Bronze M & Q Series for rinsing applications and 316 Stainless-Steel K & KX Series for high-purity production, Gould Solenoid Valves ensures optimal performance in every stage of food and beverage manufacturing.
Browse Our Inventory
Food and beverage manufacturers require corrosion-resistant solenoid valves to control flow, prevent contamination, and support automated processing systems. Gould Solenoid Valves are engineered to handle:
Gould Solenoid Valves provide hygienic, precise, and durable fluid control in food and beverage processing. Designed for automated production lines, CIP systems, and ingredient handling, our valves integrate seamlessly with processing equipment to optimize efficiency and reduce downtime.
Yes. Gould's stainless series are built from cast CF8M 316 stainless steel, and the KX and KX-1 series are complete 316 stainless steel for all wetted parts — the specification most food and beverage processors write for product-contact service. Sizes run 1/8" to 2" NPT, full port, with Teflon™ (-3T) or ethylene propylene (-3EP) seats. Confirm certification requirements for your specific application with Gould at 800-634-6853.
The KX series and its high-temperature counterpart KX-1. Both use cast CF8M 316 stainless bodies with complete 316 stainless steel for all wetted parts, 316 stainless bonnet tubes welded to a 316 stainless bonnet, and 316 stainless piston assemblies with Teflon™ piston rings. The KX is 5–300 psi to 300°F; the KX-1 is 5–150 psi to 450°F.
Use a high-temperature series. The KX-1 is complete 316 stainless for all wetted parts, 5–150 psi, rated to 450°F with Class H coils. The K-1 is CF8M 316 stainless, 1/8" to 2", 5–400 psi, also rated to 450°F. Both handle hot water and hot CIP solution; Gould coils are watertight and corrosion resistant, molded from filled polyester.
Yes. The Q-1 bronze series handles steam to 200 psi at fluid temperatures to 450°F in 1/8" to 3" NPT. The K-1 stainless series handles steam at 5–150 psi or 10–200 psi to 450°F. For smaller steam lines, the direct-acting BH-19 handles 0–100 psi steam to 450°F in 1/8", 1/4" and 3/8". All use Class H high-temperature coils.
Teflon™ (-3T) is the standard choice for the stainless K, K-1, KX and KX-1 series because it tolerates high temperature and a broad chemical range, including CIP caustics and acids. Ethylene propylene (-3EP) is the alternative on the KX, K and M-1 series and is used for low-pressure steam, though EP models carry reduced ratings — on the M-1 series, 5–50 psi and 298°F.
Gould coils are molded from filled polyester and specified as watertight and corrosion resistant with 18" leads and a 1/2" conduit connector; the M series and direct-acting B4-21 Class H coils are rated NEMA 4X. For dusty dry-goods areas, the -2 explosion-proof housing also meets NEMA 4 watertight/corrosive resistant and NEMA 5 dusttight in a single enclosure.
Stainless series run 1/8" to 2" NPT full port; bronze Q and Q-1 reach 3". Coils are available in 12, 24, 120, 240 and 480 VAC at 50/60 Hz and 12, 24, 32, 48, 115 and 230 VDC, 26 watts maximum, and Gould will build non-standard coils to a specified voltage, wattage and lead-wire length. Coils can be replaced without removing the valve body from the line.
Whether you're operating a brewery, distillery, dairy, food processing plant, or beverage bottling facility, Gould Solenoid Valves provides sanitary, high-performance solutions to optimize your fluid control systems. Contact our team today to discuss your specific application needs.
Get in Touch