Efficient water distribution, irrigation control, and fluid management are essential for modern farming, greenhouse operations, and agricultural automation. At Gould Solenoid Valves, we manufacture high-performance, American-made solenoid valves designed to handle water, fertilizers, chemicals, and irrigation fluids with precision and reliability.
Built for demanding outdoor environments, our solenoid valves provide precise flow regulation, corrosion resistance, and long service life—ensuring efficient irrigation, reduced water waste, and improved crop yields. Whether used in drip irrigation, sprinkler systems, or fertigation, our valves integrate seamlessly into automated irrigation networks and fluid-handling systems.
Browse Our Inventory
Precision water management is critical to maintaining healthy crops, optimizing resources, and improving agricultural efficiency. Gould Solenoid Valves are designed to handle:
Gould Solenoid Valves provide precision control, reliable operation, and long service life in agricultural irrigation, greenhouse automation, and fluid management applications. Built for high-volume water distribution and specialty fluid handling, our valves ensure efficiency and durability in farming operations.
Gould's bronze Q series is the primary irrigation valve: 1/8" to 3" NPT, 5–400 psi, rated to 300°F, full port, normally closed or normally open. For smaller general-purpose water lines the bronze M series covers 1/8" to 2" at 5–250 psi, normally closed. Both use the Velvetrol® internal piston pilot design and are packless, so there is no packing gland to leak in the field.
3" NPT, on the bronze Q and Q-1 series. All other Gould series stop at 2" — that includes the 316 stainless K, K-1, KX and KX-1 series and the bronze D series — while the B series is limited to 1/4", 3/8" and 1/2". Every Velvetrol® pilot-operated valve is full port, so the 3" valve passes full 3" flow.
Not with a controlled closing stroke. Gould's Velvetrol® internal piston pilot cushions closure, and Gould's published testing measures the resulting spike at 10 psi versus 80 psi for a conventional valve, an 81–88% reduction, while noting that conventional valves can generate spikes exceeding 6,600 psi in larger sizes. On long buried mains, also order the -81 factory slow-close setting.
Use stainless. The K series is cast CF8M 316 stainless in 1/8" to 2" NPT with bodies rated to 1000 psi and Teflon™ (-3T), Buna (-3B), EP (-3EP) or Viton® (-3V) seats. For concentrated fertilizer or acid injection, the KX series at 5–300 psi is complete 316 stainless steel for all wetted parts. Verify seat compatibility with the specific product being injected.
A full-port, packless valve is the better bet because there is no restricted orifice or packing gland to collect debris, and Gould reports consistent Cv over the valve's service life rather than the gradual flow loss of a diaphragm design. Bronze Q or M series suits most well water; move to 316 stainless K series where the water is corrosive. Upstream filtration is still recommended.
Gould offers DC coils at 12, 24, 32, 48, 115 and 230 volts, 26 watts maximum — 24 watts on the M series — which covers battery and solar-powered controllers where AC is not available. AC coils are 12, 24, 120, 240 and 480 volts at 50/60 Hz. Gould will also build non-standard coils to a specified voltage, wattage and lead-wire length.
Any normally closed valve shuts when de-energized. The M, M-1, QD, QD-1, KD, KD-1, B4-21 and BH-19 series are normally closed only, so they always fail closed. The Q, Q-1, K, K-1, KX, KX-1, B and D series are available in either configuration — specify normally closed for fail-safe shut-off, or normally open where the zone must keep flowing on a control failure.
Whether you're managing large-scale irrigation, automating a greenhouse, or optimizing fluid control in farming operations, Gould Solenoid Valves provides high-performance, durable solutions to meet your exact flow control requirements. Contact our team today to discuss your specific application needs.
Get in Touch