Water and wastewater treatment facilities require precise, corrosion-resistant solenoid valves to manage filtration, purification, chemical dosing, and sludge processing efficiently. As part of larger water treatment systems, Gould Solenoid Valves play a critical role in ensuring plant operations run smoothly and reliably.
With 90+ years of expertise, our stainless steel and 316 stainless steel solenoid valves are designed for harsh environments, aggressive media, and high-pressure applications. Our valves ensure long-term reliability, minimal maintenance, and industry-leading performance—reducing plant downtime and protecting your operation’s bottom line.
Browse Our Inventory
Water treatment facilities require precise, dependable fluid control to maintain filtration, prevent water hammer, chemical balancing, and waste removal processes. Gould Solenoid Valves are engineered to handle:
Gould Solenoid Valves are built to withstand corrosive environments, high pressures, and aggressive media in municipal and industrial water treatment facilities. Our two-way solenoid valves ensure precise control and durability, making them ideal for:
Gould's bronze Q series and 316 stainless K series are the two workhorses in treatment plants. The Q series covers 1/8" to 3" NPT at 5–400 psi to 300°F for aqueous liquids; the K series covers 1/8" to 2" in CF8M 316 stainless with bodies rated to 1000 psi for corrosive service such as chemical feed. Both use the Velvetrol® internal piston pilot design and are full port.
Yes. Gould valves are compliant with American Iron and Steel (AIS), Build America Buy America (BABA) and the Trade Agreements Act (TAA), which is what a State Revolving Fund or federally funded municipal water project requires. J.D. Gould Company manufactures in Indianapolis, Indiana, is registered in SAM, is HUBZone eligible and is ISO 9001 certified.
The Velvetrol® internal piston pilot controls the closing stroke rather than letting a diaphragm slam shut. Gould's published testing shows pressure spikes reduced 81–88%, measured as 10 psi versus 80 psi for a conventional valve on the same line. For lines that need even gentler closure, the -81 factory slow-close setting is available at no charge.
Use the 316 stainless K series or, for the most aggressive chemistry, the KX series, which is complete 316 stainless steel for all wetted parts. The K series is rated to 300°F with Teflon™ (-3T), Buna (-3B), EP (-3EP) or Viton® (-3V) seats; the KX series is 5–300 psi with Teflon™ or EP seats. Match the seat elastomer to the specific chemical before ordering.
Size on required flow capacity (Cv) and available pressure drop, not on line size alone. Gould publishes Cv values by series and size and also offers a Cv calculator. Cv is the volume that will flow through the valve wide open at a given pressure drop — GPM for liquids — and pressure drop is inlet pressure minus back pressure. Available sizes run 1/8" to 3" NPT depending on series.
Gould's Velvetrol® design is packless and full port, which removes the packing gland and the flow restriction that trap debris in conventional designs, and Gould reports consistent Cv over the valve's service life rather than the gradual flow loss typical of diaphragm valves. Any solenoid valve still needs upstream straining in gritty service — confirm the application with Gould's engineers at 800-634-6853.
Yes. Gould rebuild kits include a new piston assembly, pilot assembly, piston spring and all applicable seals, and the valve can be rebuilt in-line without removing the body from the piping. Order by series, pipe size and seat material. Rebuild kits ship immediately, which matters when a plant cannot take a process line out of service.
Gould Solenoid Valves provides high-performance, AIS (American Iron and Steel) Compliant, BABA (Build America, Buy America Act) Compliant, Made-in-USA manufacturer of solenoid valves designed to support the critical needs of municipal and industrial water treatment facilities. Whether you need rapid delivery to avoid downtime or a custom-engineered solution, our team is here to help. Contact us today to discuss your application.
Get in Touch