In batching, metering, and dosing applications, precise fluid control is critical to maintaining consistent quality and accuracy in manufacturing, processing, and water treatment systems. At Gould Solenoid Valves, we manufacture durable, high-performance solenoid valves designed for accurate, repeatable fluid dispensing across a range of industries, including food & beverage, chemical processing, pharmaceuticals, and industrial automation.
Our M & Q Series valves provide precise flow regulation, rapid response times, and leak-free operation, ensuring efficiency and consistency in automated metering and batching systems. Built for long-lasting performance, our valves help manufacturers reduce waste, improve process efficiency, and maintain strict quality standards.
Browse Our Inventory
Batching and metering systems require precise control over fluid flow, pressure, and timing to ensure accurate dispensing and dosing. Gould Solenoid Valves are designed to handle:
Gould Solenoid Valves provide precise, reliable, and efficient flow control in high-accuracy dosing, dispensing, and metering applications. Built for automated production lines and process systems, our valves ensure precise fluid measurement, repeatability, and durability in industrial metering and batching environments.
A valve whose flow capacity does not drift. Gould's Velvetrol® internal piston pilot design is full port and packless, and Gould reports consistent Cv over the valve's service life — the flow coefficient you calibrated the batch against is the one you still have thousands of cycles later, unlike a diaphragm valve whose Cv changes as the diaphragm stretches and stiffens.
The QD and KD series. Both open at 0 psi minimum in 1/8" to 1" NPT, in bronze or stainless, normally closed only. Maximum differential is deliberately low: on the QD, 7 psi on gases and 6 psi on water at 1/8"–1/2", falling to 2 psi on gases and 1 psi on water at 1". The KD is 6 psi on gases and water at 1/8" and 1/2".
The QD and QD-1 use a .63" orifice in 1/8" through 1/2", .88" in 3/4" and 1.00" in 1". The KD and KD-1 use .63" at 1/8", .50" at 1/2", .75" at 3/4" and 1.00" at 1". Because the orifice, not just the pipe size, sets the flow, specify by model and size when calculating batch fill times.
It changes the trailing edge of the fill. Gould offers -81 factory slow close and -84 factory quick close at no charge on its pilot-operated series, so you can tune whether the valve shuts abruptly for a sharp cut-off or eases closed to protect the line. The -81 setting is specified to reduce water hammer, which matters on long or rigid batch headers.
The 316 stainless K series in 1/8" to 2" NPT, with bodies rated to 1000 psi and a choice of Teflon™ (-3T), Buna (-3B), EP (-3EP) or Viton® (-3V) seats. For the most aggressive chemistry, the KX series at 5–300 psi is complete 316 stainless steel for all wetted parts with Teflon™ or EP seats. Confirm elastomer compatibility with the specific chemical before ordering.
Work from required flow and available pressure drop. Cv is the volume that flows through the valve wide open at a given pressure drop — GPM for liquids, SCFH for gases, pounds per hour for steam — and pressure drop is inlet pressure minus back pressure. Gould publishes Cv values by series and size along with a Cv calculator, so you match Cv to the fill rate rather than guessing from line size.
Yes, with the explosion-proof option. Adding -2 to a QD or KD part number supplies a NEMA 7 explosion-proof coil housing that also meets NEMA 4 watertight and NEMA 5 dusttight. The rating covers Class 1 Div 2, Class 1 Group D and Class 2 Groups E, F and G. Standard QD and KD coils are 120, 240 or 480 VAC at 60 Hz, 20 watts maximum.
Whether you're managing an industrial batching system, automating fluid metering, or optimizing dosing applications, Gould Solenoid Valves provides high-performance solutions to keep your operations efficient, precise, and reliable. Contact our team today to discuss your specific application needs.
Get in Touch